Cement Packing Machine
The fineness of the finished product of the Cement Packing Machine is adjusted to the appropriate size, which is also a skill we must master. How to adjust the finished product size?
How to adjust the discharge fineness of the Cement Packing Machine
1. Control the fineness of the discharge by adjusting the fineness of the screen. Due to the material factor, the fineness of the product will also fluctuate up and down;
2. The fineness can also be controlled on the feeding. If the feeding is increased, the fineness of the finished product will be thicker, and the reduction will make the fineness of the product thinner, but it should be added as appropriate, not too much and too little, and affecting the movement. The normal operation of the crusher;
3. Separate the good quality materials and the poor quality materials to ensure the quality of the grade powder;
4, adjust the height of the hood can also control the fineness, inside the sharer, the upper side of the core tube is equipped with a hood that can be lifted and lowered, the lowering will make the fineness finer, and vice versa will make the fineness thicker, if necessary fineness Less low can be adjusted after removing the hood;
5. Adjust the air volume, and adjust the air volume by installing the regulator in the part of the induced draft fan. The smaller the air volume, the higher the fineness will be. However, when adjusting, you need to pay attention to the air volume. If it is too small, it will cause powder to be sprayed out, so adjust the amount appropriately. ;
6. Adjust the fan of the main unit. If we have adjusted the air volume to a small size, but still can’t reach the desired fineness, we can reduce the fan blade of the Cement Packing Machine main unit to 3 or 2 pieces. To increase the grinding time of the material in the grinding chamber;
7. Adjust the analyzer, the amount of material processed by the analyzer in the same period of time increases, and the powder after the grinding in the grinding chamber finally passes through the analyzer and the product will be closer to the desired fineness.
Adjusting the fineness of the finished product with appropriate aspects can improve the efficiency of the work for the customer, without repeated processing, and prolong the production time. In addition, the configuration of suitable auxiliary devices can also make the grinding line work more smoothly, and want to know more. Cement Packing Machine can be viewed by clicking on our product center.